Integra WM is an electronic multifunctional handwashing unit with a uniformed back-splash and a concealed drain pipe. The elegant spouts that supply water-soap-air are visible and mounted on the top of the backsplash where all components are embodied. This upper part of the backsplash also plays the role of a shelf which can be removed for maintenance or inspection.
General features:
- Washbasin and multiconsole material: white acrylic based “Solid Surface”.
- Washbasin type: single washbasin per each position.
- Number of positions: one, two or three.
- Dimensions of each position: 700x560mmxh380mm.
- Washbasin fixing system: brick wall mounting with expansion plugs.
- Integrated components: a tap (faucet) with anti-flooding system, a soap dispenser with anti-dripping system and a hand-dryer, all functioning through infrared electronic circuits.
- Outlets: 3 chromed solid brass spouts per each position (70x10x180mm).
- Hydraulic parts: internal parts in solid brass, equipped with stopcock valves and non visible siphon.
- Thermostatic mixer: supplied for hot and cold water connection (non visible). Not supplied for cold or pre-mixed water.
- Supply voltage: 230V CE or 120V UL-CSA.
- Absorption capacity: 620W when hand dryer functions.
- Optional: mirror with perimeter LED lighting and luminous usage-guide indication icons (water, soap, air), H=600.
Technical specifications:
Tap/faucet:
- Operating pressure: 1-10 bar.
- Water flow: 5-6L/min at 3 bar, 2L/min LEED version.
- Tap (faucet) functions: a) opening: 1 sec after hand detection by the infrared system, b) closing: 1 sec after detection is terminated or after 60 seconds of continuous functioning (anti-flood shutoff system).
Soap dispenser:
- Components: 1l-tank with peristaltic pump.
- Soap dose: adjustable.
- Dispenser functions: 1 sec after hand detection by the infrared system; anti-drip system when closing.
Hand-dryer:
- Airflow speed: 400 km/h.
- Power: 600W.
- Hand-dryer functions: starting 1 sec after hand detection by the infrared system.
Installation requirements:
- Wall fixing: directly on brick or concrete walls / gypsum walls must be properly reinforced.
- Electrical connection: 230V/2.7 A CE, or 120V/5.2 A UL-CSA (Pmax 620W) per each position.
- Water connection: one/two 1/2” F junctions per each position.
- Drain connection: Ø32mm per each position
